National-scale implementation of mandatory freshwater farm plans: a mechanism to deliver water quality improvement in productive catchments in New Zealand?

Nutrient Cycling in Agroecosystems - Reducing agriculturally derived diffuse contaminant losses (via non-point sources) from land to water has proven difficult for decades. Owing to the diversity...     

A thermal perspective of flash sintering: The effect of AC current ramp rate on microstructure evolution

In flash sintering experiments, the thermal history of the sample is key to understanding the mechanisms underlying densification rate and final properties. By combining robust temperature measurements with current-ramp-rate control, this study examined the effects of the thermal profile on the flash sintering of yttria-stabilized zirconia, with experiments ranging from a few seconds to several hours. The final density was maximized at slower heating rates, although processes slower than a certain threshold led to grain growth. The amount of grain growth observed was comparable to a similar conventional thermal process. The bulk electrical conductivity correlated with the maximum temperature and cooling rate. The only property that exhibited behavior that could not be attributed to solely the thermal profile was the grain boundary conductivity, which was consistently higher than conventional in flash sintered samples. These results suggest that, during flash sintering, athermal electric field effects are relegated to the grain boundary.     

Engineering Silver-Enriched Copper Core-Shell Electrocatalysts to Enhance the Production of Ethylene and C2+ Chemicals from Carbon Dioxide at Low Cell Potentials

Copper catalysts are widely studied for the electroreduction of carbon dioxide (CO₂) to value-added hydrocarbon products. Controlling the surface composition of copper nanomaterials may provide the electronic and structural properties necessary for carbon-carbon coupling, thus increasing the Faradaic efficiency (FE) towards ethylene and other multi-carbon (C₂₊) products. Synthesis and catalytic study of silver-coated copper nanoparticles (Cu@Ag NPs) for the reduction of CO₂ are presented. Bimetallic CuAg NPs are typically difficult to produce due to the bulk immiscibility between these two metals. Slow injection of the silver precursor, concentrations of organic capping agents, and gas environment proved critical to control the size and metal distribution of the Cu@Ag NPs. The optimized Cu@Ag electrocatalyst exhibited a very low onset cell potential of −2.25 V for ethylene formation, reaching a FE towards C₂₊ products (FE_C2+) of 43% at −2.50 V, which is 1.0 V lower than a reference Cu catalyst to reach a similar FE_C2+. The high ethylene formation at low potentials is attributed to enhanced C C coupling on the Ag enriched shell of the Cu@Ag electrocatalysts. This study offers a new catalyst design towards increasing the efficiency for the electroreduction of CO₂ to value-added chemicals.     

Applicability Boron-Containing Materials Obtained by Self-Propagating High-Temperature Synthesis in Radiation Protection Technology

Atomic Energy - An implementation assessment of PSKD-600 type power reactors was made. It was established that the readiness level of all PSKD-600 nuclear fuel cycle technologies is no lower than...     

Competitiveness Assessment of Regenerated Uranium-Plutonium Remix Fuel in Thermal Reactors

Atomic Energy - An economic and mathematical model has been developed to determine the competitiveness of REMIX-A and -C uranium-plutonium fuel obtained by reprocessing spent fuel from thermal...     

Structural,electronic paramagnetic resonance and magnetic properties of praseodymium-doped rare earth CeO2 semiconductors

In this work, praseodymium (Pr) doped cerium oxide (CeO₂) was prepared using the microwave-assisted hydrothermal method (MAH) and the properties were investigated by X-ray diffraction analysis (XRD), Raman spectroscopy, Field Emission Gun Scanning Electron Microscope (FEG-SEM), BET method, Photoluminescence spectroscopy (PL), Fourier-transform infrared spectroscopy (FTIR), Ultraviolet–visible spectroscopy (UV–Vis), Electron paramagnetic resonance spectroscopy (EPR) and Magnetometry. The results showed that increasing the Pr-doping promotes a structural disorder due to increased oxygen vacancies. XRD confirmed a cubic structure without deleterious phases with modifications in the structure caused by alteration in the cerium oxidation state as well as changes in the crystallite size and strain obtained by Wellinson-Hall method. Raman spectroscopy shows that changing the Pr content results in samples with different defect densities at short range. FEG-SEM showed that the nanocrystals are agglomerated with small particles tend to aggregate spontaneously to decrease the surface energy. BET method showed that the Pr doping results in a gain of specific surface area. PL indicated that Pr³⁺ leads to distinct emissions; red emission associated to oxygen vacancies located near the conduction band (shallow defects), green emission associated to electron-hole recombination and orange emission associated to shallow defects and electron-hole recombination. FTIR indicated the complete process of nucleation with no other phase. UV–Vis showed the transitions between oxygen 2p, cerium 4f and praseodymium 4f states. The EPR signal shows events occurring around 344 mT. These events can be related due the presence of paramagnetic elements containing unpaired electrons, such as Ce (III), which is indicative of cerium reduction caused by Pr ions, as evidenced by Rietveld data. Regardless of the Pr concentration used in this research, the magnetic measurements show a superparamagnetic system below the blocking temperature of ~20 K and a paramagnetic system above this temperature, which indicates no significant changes in the average size of the nanoparticles. Surface area, crystallite size and the temperature are important parameters, which control the magnetic properties of such N-type semiconductors.     

A Comprehensive Review of Genetically Engineered Mouse Models for Prader-Willi Syndrome Research

Prader-Willi syndrome (PWS) is a neurogenetic multifactorial disorder caused by the deletion or inactivation of paternally imprinted genes on human chromosome 15q11-q13. The affected homologous locus is on mouse chromosome 7C. The positional conservation and organization of genes including the imprinting pattern between mice and men implies similar physiological functions of this locus. Therefore, considerable efforts to recreate the pathogenesis of PWS have been accomplished in mouse models. We provide a summary of different mouse models that were generated for the analysis of PWS and discuss their impact on our current understanding of corresponding genes, their putative functions and the pathogenesis of PWS. Murine models of PWS unveiled the contribution of each affected gene to this multi-facetted disease, and also enabled the establishment of the minimal critical genomic region (PWScr) responsible for core symptoms, highlighting the importance of non-protein coding genes in the PWS locus. Although the underlying disease-causing mechanisms of PWS remain widely unresolved and existing mouse models do not fully capture the entire spectrum of the human PWS disorder, continuous improvements of genetically engineered mouse models have proven to be very powerful and valuable tools in PWS research.     

Amyloid-Beta Induces Different Expression Pattern of Tissue Transglutaminase and Its Isoforms on Olfactory Ensheathing Cells: Modulatory Effect of Indicaxanthin

Herein, we assessed the effect of full native peptide of amyloid-beta (Aβ) (1-42) and its fragments (25-35 and 35-25) on tissue transglutaminase (TG2) and its isoforms (TG2-Long and TG2-Short) expression levels on olfactory ensheathing cells (OECs). Vimentin and glial fibrillary acid protein (GFAP) were also studied. The effect of the pre-treatment with indicaxanthin from Opuntia ficus-indica fruit on TG2 expression levels and its isoforms, cell viability, total reactive oxygen species (ROS), superoxide anion (O₂⁻), and apoptotic pathway activation was assessed. The levels of Nestin and cyclin D1 were also evaluated. Our findings highlight that OECs exposure to Aβ(1-42) and its fragments induced an increase in TG2 expression levels and a different expression pattern of its isoforms. Indicaxanthin pre-treatment reduced TG2 overexpression, modulating the expression of TG2 isoforms. It reduced total ROS and O₂⁻ production, GFAP and Vimentin levels, inhibiting apoptotic pathway activation. It also induced an increase in the Nestin and cyclin D1 expression levels. Our data demonstrated that indicaxanthin pre-treatment stimulated OECs self-renewal through the reparative activity played by TG2. They also suggest that Aβ might modify TG2 conformation in OECs and that indicaxanthin pre-treatment might modulate TG2 conformation, stimulating neural regeneration in Alzheimer’s disease.     

Sorption of meso-Phenylporphyrin Iodide on Polystyrene–Bentonite Film Composites

Protection of Metals and Physical Chemistry of Surfaces - Modification of polystyrene (PS) with bentonite was carried out, and film materials with improved sorption properties toward...     

Study and Development of Superhydrophobic Coatings Based on Silicon Dioxide

Glass Physics and Chemistry - It is found that the chemical composition of the surface cannot fully provide superhydrophobicity, as a combination of a hydrophobic material with an appropriate...